First, the main functions of the automatic mask machine
The production line of this equipment is mainly composed of a body machine, a flap conveying line and two ear strap welding machines. After the main body machine outputs the mask body, the mask body sheet is conveyed to the turning mechanism through the conveyor belt structure. Turn the mask disc on the conveyor belt connected to the ear belt machine through the turning machine, and then transfer the mask sheet to the front mask disk of the ear belt machine through the conveyor belt, and then place the mask sheet on the mask disk of the ear belt machine by pressing down the cylinder Then, the ear strap machine was used to complete the welding of the ear straps of the mask, thereby completing the production of the outer ear strap mask products. The whole line is a two-for-one structure. The automatic mask machine adopts PLC and touch screen control, the main conveyor belt adopts single-phase motor to convey, the stepping motor reverses, drives, and the control is stable.
Second, the main features of the automatic mask machine
1. The raw materials are automatically unfolded, automatically transported, the nose bridge is cut off, the edge of the mask is welded, ultrasonic fusion, forming and cutting, and ear wire welding are all made automatically, and the output is high;
2. Computer PLC programming control, servo drive, good running stability, low failure rate;
3. Automatic tension control, used for unwinding of non-woven fabric to ensure a balanced feed tension;
4. The optical fiber sensor detects the raw materials, avoids the lack of materials to produce defective products, and reduces waste;
5. The welding point pattern of the mask body can be specified by the customer, and changing the mold can produce masks of different sizes and styles;
6. The whole machine adopts aluminum alloy structure, which is beautiful and firm without rust.
Three, the use environment of the automatic mask machine
1. Working temperature: 0~40℃, humidity: 5~38%HR, no flammable gas, corrosive gas, no dust in the workshop (not less than 100,000);
2. The power of the whole line is about 8.5KW;
3. Production efficiency: 120pcs/min (one for two layout);
4. The external dimensions of the equipment are approximately: 6500*4000*2000mm.
